KEY WORD:4D HIFU MACHINE;V-MAX MACHINE;3D HIFU MACHINE,
description：4D HIFU machine remove wrinkles ,lifting,and tightening skin,imporve skin elasticity and shaping contour,Increase metabolism, anti- aging
4D HIFU face and body treatment
Longtree 12 lines 4D HIFU is ultrasound energy distance of width, length and depth, which more Comprehensive, three-dimensional. Directly delivers heat energy to skin and subcutaneous tissue that can stimulate and renew the skin's collagen and thus consequently improving the texture and reducing sagging of the skin.
High intensity focused ultrasound machine focusing reaches the SMAS layer with its specific high-energy focused ultrasound, improves the SMAS suspension, comprehensively solve the facial sagging and relaxation problems. It accurately positions the ultrasonic power on the SMAS 4.5mm under skin, performing the best effect
of shaping, pulling and compacting for muscle growth and traction; impacts on the collagen layer 3mm under skin, making the collagen restructured and newborn, solving the aging problems by recovering elasticity, skin whitening, wrinkle removing and pores shrinking.
Remove wrinkles on around forehead, eyes, mouth, etc. Lifting and tightening both cheeks skin. Improving skin elasticity and shaping contour. Tightening the skin tissue on forehead, lifting the eyebrows lines. Improving skin complexion, making the skin delicate and bright Removing neck wrinkles, protecting neck aging.
Treatment site and energy reference
Neck:0.6J, Temple/Crow's feet:0.5J, Forehead:0.5J
Neck:1.0J, Chin:1.0J, Jaw:0.8J, Cheek:1.0J, Temple:0.7J, Forehead: 0.6J.
Apple muscle:0.8J, Chin:1.0J, Jaw:0.7J,Cheek:1.0J, Temple:0.7J, Forehead 0.4J.
Back: 0.8J, Chest: 0.6J, Abdomen: 1.0J,Hand : 1.0J.
Chest: 0.7J, back: 0.8J, abdomen: 1.0J.
Chest: 0.7J, back: 0.8J, abdomen: 1.0J.
Abdomen: 1.0J, leg: 1.0J, buttocks: 1.2J.
Abdomen 0.8J, buttocks: 1.2J.
Radar lce Sculpture Machine Theroy
Radar lce Sculpture combines a sophisticated radar automatic tracking system with mechanical radar waves to precilocate the deep layers of the skin, the fascia layer, the fat layer and the muscle layer,and actively identify fat cells,fibroblasts and collagen cells to achieve efficacy of tightening the loose skin ,Smoothing the skin ,removing wrinkles,reshaping the facial, creating a V-face and frosting age to anti-aging .
By using mechanical millimeter radar waves with good tissue penetration, accurately transfer 65 degrees of thermalenergy to the SMAS layer of the skin (approximately 3.5mm ~ 4.5mm), effectively stimulate fibroblasts to split the necells at 40 times per second,Dissolves facial fat cells,tightens skin contours, repairs damaged fibrous tissue, stimularegeneration of collagen cells, and quickly achieves the effect of face-lifting
and firming Q-bombs.At the same time, 1precise positioning of radar waves can be used to actively identify fat cells. Through a unique self-cooling mode, it careach the depths of the target in a massage treatment mode.so that patients do not feel painful.
1.Mechanical millimeter radar wave transmits65 degrees of thermal energy to the SMASlayer (about 3.5mm to 4.5mm), which causes thermal coagulation shinks the skin regenerates collagen, tightens the skin,removes wrinkles, improves relaxation,reshapes the contours .
2.The accurate positioning of the mechmillimeter radar wave can actively identcells, and has a good blasting effecton subcutaneous adipose tissue. It haseffects of lipolysis, thin face, and slimming
1.Facial lifting , reshaping contours ,Tightening the eyes, cheeks, forehead and neck, improve the contour of all facial.2. Skin firming, improve relaxation skin , stimulate collagen regeneration in the body, increase collagen content in skin,increase the skin elasticity, restore skin firm ,review plump young skin
2.Increase metabolism, reverse aging - promote the decomposition of subcutaneous fat and the metabolism of collagcells, stimulate the spontaneous proliferation and reorganization of elastic fibers, reverse the process of aging due totloss of collagen cells
3.Control the secretion of facial oils, contract facial pores.
4.Remove wrinkles , such as crow's feet,forehead line, eyebrow , squatting , ears , lips , nasolabial furrows, and neckwrinkles, to review smooth skin.
TWO-IN-ONE 4D HIFU
(4D HIFU+Cooling Carving)
1、4D Overview 3
2、4D Principle: 3
3、4D Technical advantages: 4
4、Instrument parts 6
5、4D Cartridges introductions: 7
6、 Instrument installation 8
7、4D handle interface introduction 9
8、4D operational steps 11
9、4D Background settings 12
10、Introduction of Radar Cooling Carving HIFU 14
11、Description of cooling carving handle 14
12、Treatment principle 15
13、Technical advantages 15
14、Steps of adding water 17
15、Energy test of cooling carving 17
16、Probe replacement of cooling carving 18
17、Instrument operation 19
18、Those people are prohibited to use 20
19、Product service and maintenance 20
20、Technical specifications. 20
21、Precautions and Maintain common sense 21
22、Certificate of quality 22
Our company's latest black technology products 4D anti-aging can achieve the perfect effect of firming, removing wrinkle, shaping and anti-aging. We use the most advanced ultrasonic energy, deep penetration, which can directly reach the skin SMAS layer. The corresponding cartridge energy reaches the dermis layer so that the fibrous tissue densely arranged to make the skin smooth and delicate, accelerate subcutaneous tissue cell activity, stimulate new dermal collagen, and thermally coagulate the fascia layer, which produces the effect of tightening and lifting so that firming the skin. The skin's improvement from deep to shallow supports the subcutaneous structure of the skin, which helps the underlying skin to restore elasticity and lift facial skin. This is the safest and most effective way for the beauty industry to treat facial, body aging, sagging and relaxation problems. It can lift face, firm body, anti-aging all at once instead of multiple treatments, and there are no wounds, no recovery period, no bleeding. The 3D anti-aging has been recognized by the authoritative organizations in the beauty industry. It’s known as the miracle of eternal youth!
With its unique high-energy focused ultrasound, it can directly reach the SMAS layer, promote the suspension of SMAS fascia,and comprehensively solve the sagging and relaxation problems of the face.It precisely locates the ultrasonic energy on the fascia layer and collagen layer of different depths under the skin ,which play a role in the fascia layer to growth and pull the muscle to achieve the best effects of shaping body and tightening skin ,and make collagen recombine and regenerate, so as to achieve anti-aging problems such as skin elasticity, whitening, wrinkle removal and pore reduction.At the same time, because the energy swept across the epidermis, don’t need to be worry about epidermis to get hurt completely and can make the skin arrives the effect that pulls quickly, compact outline, fast smooth furrow!
3、4D Technical advantages:
1、4D anti-aging can hit 1 to 11 lines, the width of the maximum energy area is 10mm.The treatment length can be adjusted from 1 mm to 25 mm, and the energy can be adjusted from 0.1 J to 2.0 J. beside,the corresponding parameters can be adjusted according to the size and length of the treatment area and the customer's bearing capacity, which greatly shortens the operation time, makes the energy points acting on the skin more uniform and has better curative effect.It uses the original imported linear motor,which can adjust the gear to change the speed of the dotting. There are 1 to 5 gear adjustments (the 1st gear is the fastest gear).The motor is ultra quiet, and the silence is below 20 dB.When operating to the guests, it will make the guest enjoy the service happily, and there will be no motor jams, resulting in stuck spots. The dots are stable, vertical and even, which will be safer and safer to operate for guests.
2、Using the most advanced high-tech technology, equipped with eight therapeutic heads according to the skin condition of facial and body,which accurately affects different depths of skin,and the energy is slightly over the epidermis during treatment, and 100% without any damage at the same time, the depth of the skin treated by the treatment head is consistent with the set value, ensuring the customer's painless and comfortable.
3、In addition to the thermal effect on dermal collagen fiber,it also has thermal stimulation on the fat layer and fascia layer(SMAS),and the therapeutic effect is far better that that of Thermage.
4、The operation is simple and convenient, no need for consumables, greatly reducing treatment costs.
5、The effect of tightening and shaping can be seen immediately after treatment, which can last for at least 18-24 months at a time, and achieve negative growth for skin age once a year.
6、Makeup immediately after treatment does not affect normal life and work.
4、 Instrument parts：
5、4D Cartridges introductions:
6、 Instrument installation
1.Installing the handle rack to the host as shown in the figure below (screw holes are reserved in the installation position).
|| Treatment site and reference energy
||Temple (crow's feet): 0.5J;Neck: 0.6J; Forehead: 0.5J.
||Neck: 1.0J; Chin: 1.0J;Jaw : 0.8J; cheek: 1.0J;Temple: 0.7J; forehead: 0.6j.
||Apple muscle ：0.8J； Chin: 1.0J;Jaw bone: 0.7J; cheek: 1.0J;Temple: 0.7J; Forehead: 0.4J.
||Back: 0.8J; Chest: 0.6J;
Abdomen: 1.0J; Hand: 1.0J.
||Chest: 0.7J; Back: 0.8J;Abdomen: 1.0J.
||Chest: 0.7J; Back: 0.8J;Abdomen: 1.0J.
||Abdomen: 1.0J; Leg: 1.0J;Hip: 1.2J.
||Abdomen: 0.8J, Hip: 1.2J.
Remarks: 3D anti-aging has 1.5mm, 3.0mm, 4.5mm facial cartridges and 6.0mm, 8.0mm, 10mm, 13mm, 16mm full body cartridges, you can choose the appropriate cartridge to treat the face and body parts according to your needs. The above is the recommended energy value for each part of each cartridge operation. (if the guest can still withstand, it can be adjusted accordingly, so that the guest has no tingling sensation). The corresponding cartridge energy reaches the dermis layer so that the fibrous tissue densely arranged to make the skin smooth and delicate, accelerate subcutaneous tissue cell activity, stimulate new dermal collagen, and thermally coagulate the fascia layer, which produces the effect of tightening and lifting so that firming the skin. The skin's improvement from deep to shallow supports the subcutaneous structure of the skin, which helps the underlying skin to restore elasticity and lift facial skin.
2.Insert the handle into the host and tighten the screw as shown in the picture below.
3.4D probe replacement
7、4D handle interface introduction:
1、.Connecting the power and turning on the power switch, the screen will be lighted up, click the 3D-line to enter into the operational interface.
Interface of face cartridge(DL4.5 and above)
Interface of body cartridge (DL6.0 and above)
2、 The meaning of the corresponding parameter to the cartridge, Length, Width, Clearance, Pitch, the maximum length is 25 mm, and the maximum width is 11 mm. When the setting is less than the maximum value, the distribution is also centered.
9、 4D Operational steps
1、Setting the Length, Clearance, Width, Pitch, Power, press the Save button for next use (one set of data for different depth treatment heads) or press the Start button, the instrument will check the handle once.
2、Before using the instrument, disinfect and wipe the cartridge with alcohol, clean the skin of the physiotherapy site first, so as to prevent dirt from entering the skin with the ultrasonic wave or prevent the penetration of ultrasonic wave. Please remove all metal objects from your body before treatment to avoid unexpected conditions that may affect the curative effect.
3、It’s best to use a medium with a certain viscosity, which will help the ultrasound to integrate well with the skin, and prevent reflections caused by voids, which is not conducive to better transmission of sound energy. For example: the product (photosensitive gel, gel) applies evenly to the area to be treated. During the operation, the treatment head should be kept flat against the skin, and the operation intervals should be arranged closely.
4、Replacing the treatment head with energy ranging from low to high to the experiencer’s endurance. And keep asking the experiencer about the adjustment of comfort level and energy level to ensure that the experiencer accepts the experience in a pleasant state.
5、In the problem area, the operation can be strengthened according to the customer's situation (2-3 times). Do not repeat too much for each treatment area, no more than three times to avoid redness and swelling.
6、The degree of cartridge heat doesn’t represent the output of ultrasonic power; the water with small concentration or medicine should not penetrate directly, otherwise it is easy to cause skin dryness.
9、4D Background settings
1、When the point offset center needs to enter the background Settings (factory has been set, the customer does not need to adjust). Enter background Settings press the background Settings button on the main page for 3 seconds to enter background Settings.
2、Click this to adjust the button，bring up the background offset setting button. adjust the offset value according to the degree of offset, the "plus 1" point is 0.1 mm to the right Minus 1 ”point to the left 0.1 mm, Press this button to save，Pressing this button doesn’t save. After setting, press to return to the operation interface.
Cooling Carving handle
Please pull out the black cap of the water filler before operating the instrument.
10、Introduction of Radar Cooling Carving HIFU
Radar Cooling Carving HIFU combines a sophisticated radar automatic tracking system with mechanical radar waves to precisely locate the deep layers of the skin, the fascia layer, the fat layer and the muscle layer, and actively identify fat cells, fibroblasts and collagen cells to achieve efficacy of tightening the loose skin ,Smoothing the skin ,removing wrinkles ,reshaping the facial, creating a V-face and frosting age to anti-aging .
11、Description of cooling carving handle
By using mechanical millimeter radar waves with good tissue penetration, accurately transfer 65 degrees of thermal energy to the SMAS layer of the skin (approximately 3.5mm ~ 4.5mm), effectively stimulate fibroblasts to split the new cells at 40 times per second, Dissolves facial fat cells, tightens skin contours, repairs damaged fibrous tissue, stimulates regeneration of collagen cells, and quickly achieves the effect of face-lifting and firming Q-bombs. At the same time, the precise positioning of radar waves can be used to actively identify fat cells. Through a unique self-cooling mode, it can reach the depths of the target in a massage treatment mode. so that patients do not feel painful.
1、Mechanical millimeter radar wave transmits 65 degrees of thermal energy to the SMAS layer (about 3.5mm to 4.5mm), which causes thermal coagulation, shrinks the skin, regenerates collagen, tightens the skin, removes wrinkles, improves relaxation, reshapes the contours.
２、The accurate positioning of the mechanical millimeter radar wave can actively identify fat cells, and has a good blasting effect on subcutaneous adipose tissue. It has the effects of lipolysis, thin face, and slimming.
３、The unique self-cooling mode effectively protects the epidermis without damaging nerves and muscle tissue. Improving skin immunity and resistance.
4、The unique massage treatment mode, simple and convenient operation, Non-invasive and painful.
14、Steps of adding water
15、Energy test of cooling carving
16、Probe replacement of cooling carving
Ａ：Probe replacement of radar cooling wave
1、Operation：Place the probe on the accessory rack and connect it with the connecting socket on the host.
2、Plug the power cord into the socket .
3、Turn on the power switch of instrument.
4、Click the screen to enter into the main interface.
5、Select the corresponding operation interface according to the customer's skin.
18、Those people are prohibited to use
1、The female three period (menstrual period, pregnancy, lactation)，drunken prohibition.
2、Those people with skin infections, skin lesions, skin wounds, dermatitis and other are prohibited to use.
3、Those people with severe hypertension, heart disease, diabetes, epilepsy, mental patients, cancer patients and others are prohibited to use.
4、After exposure to the sun ,colorful light or laser treatment, the operation can only be done after one month.
5、The face is filled with injection, which can be operated after three months. There is a metal frame in the body to prohibit operation.
19、Product service and maintenance:
1、The machine is guaranteed for one year from the date of purchase (with the bill), the parts warranty is for 3 months, the quality problem will be repaired free of charge within one year, and the maintenance cost will be charged after one year.
2、Failure to provide free warranty service for the following personal reasons:
*The Failure caused by unauthorized disassembly and modified of this product.
*The Failure caused by inadvertently use or a fall.
*The Failure caused by lacking of reasonable maintenance
*The Failure caused by incorrect instruction in the instructions for use.
3、Failure caused by other reasons, such as irresistible natural disasters.
4D：/ Radar cooling wave：4M
||Including packing weight
||） Packing size
21、Warm tips: precautions and Maintain common sense
In addition to the quality of its oneself, a good beauty instrument also needs the careful maintenance of users. What should be noted during the use of beauty instruments and how to maintain it?
1.Beauty equipment is a high-precision electronic product. When storing and placing, do not place it in a place exposed to moisture, direct sunlight, or flammable or explosive materials to prevent accidental damage.
2.The surface of the beauty instrument should be kept clean. When not in use, It is best to cover it with velvet or gauze to prevent dust. For beauty equipment accessories such as: probe, patch, shovel head, electrode package, etc. must do a clean when a person done . When do a cleaning, use a dry cloth or a wrung wet cloth to wipe it. Do not wash it.
3. Matching Cosmetics must be used in accordance with the requirements of the beauty equipment instructions. For example: probes, patches, shovel heads, etc. must not be in contact with oily or corrosive cosmetics.
4.All wire type accessories are strictly forbidden to pull and twist so that the power cord is not broken, and all beauty instruments are not allowed to enter the water.
5. The beauty equipment all use the computer automatic chip to control the operation. Therefore, when in using, please try to not use high-frequency electric appliances in the surroundings to avoid interference with the normal operation of the beauty equipment (Like electric coils, hair dryers, microwave beauty instruments, etc.)
If there is interference, there are generally two kinds of phenomena (A. Normal use, suddenly crashes B. LCD screen disorderly jump), the general method is to turn off the power, restart beauty equipment.
6.The Beauty equipment can not be beaten, strong collisions and so on.
7.Its host and accessories generally need cleaning and care on a regular basis, especially the main thing is not to allow water to enter the inside of the beauty instrument.
8.If you do not use it for a long time, It is best to use a bag that is resistant to moisture and dust to protect the whole beauty equipment and it is better to work on the electricity for 15 hours or so to prevent the internal electronic devices from getting wet and aging.
If your instrument requires after-sales service, please refer to the following terms:
1. This card must be stamped by the dealer and fill in the date of purchase, otherwise it will be invalid. 2. When repairing the instrument, please send this card together with the instrument to the dealer.
3. If the invoice or this card is lost, the purchase date is subject to the production date.
4. Do not lose this card, and it will not be replaced.
Quality assurance scope:
1. If the product is in normal use according to the manual, if there is any fault, it will be repaired free of charge within one year from the date of purchase and lifelong maintenance.
2. Due to intentional or negligent use and failure to follow the instructions, resulting in product failure or damage, which is not within the scope of warranty, our company will charge parts and maintenance costs as appropriate.
3. The damage caused by the user's self inspection, refitting and commercial use is not covered by the warranty.
4. If the product is damaged due to collision, excessively high or low power supply voltage, or force majeure, it’s not covered by the warranty.
5. If you receive the goods within one month, due to product quality problems, you can exchange them as needed.
Modle Number:HL-FU04B Related Video: